FLexible Kits

FOR EVERY BUILDER

OCCUPANTS

4

CRUISE SPEED

150 kts

USEFUL LOAD

1,000 lbs

CLIMB RATE

2,000 fpm

TAKE OFF

400 FT

STALL SPEED

42 kts

SEE THE SPORTSMAN GALLERY WITH NEW INTERIOR 

TWO KITS TO MEET YOUR NEEDS

STANDARD

MORE TIME, LOWER COST

Starting at $91,800

FUSELAGE KIT

TAIL KIT

WING KIT

  • Flight surfaces are not complete, giving your more sheet metal experience to your build.
  • All sub-assemblies are in part form, but all parts are complete and few specialized tools are required.
  • Some parts are corrosion proofed by the vendor, but a large portion is left for the builder.
  • Uses the same Bonded Fuselage that requires some composite bonding of the strakes to set the horizontal.

QUICK BUILD

LESS TIME BUILDING

Starting at $119,850

FUSELAGE KIT

TAIL KIT

WINGS KIT

  • Our Most completed kit package ever. Airframe kits are built to the same starting point as you would see in Two Weeks to Taxi. (to meet the major portion rule)
  • All metallic flight surface components are fully corrosion proofed to a standard found on type-certified aircraft.
  • Flaps, Horizontal, and Rudder are complete. The Ailerons and Elevator are mostly assembled. 
  • The wings have the lower skins riveted and the upper skins are match-drilled and ready to assemble.
  • All assemblies and sub-assemblies contain matched pilot holes, greatly reducing build time

THE SUB KITS

FUSELAGE

The Fuselage Kit comes with everything needed to complete your Sportsman structure and interior. This includes the bonded shell and 4130 powder coated steel cage with complete systems routing and main gear legs. 

WINGS

The wing kit includes all parts and hardware to assemble the wings, flaps, ailerons, and fuel tanks.  This also includes the new AeroLED Nav/Strobe Position lights and high efficient LED Landing Lights, systems from pitot static to control cables and fuel lines.

TAIL

The tail kits are complete with rudder, horizontal, and elevator, along with tip fairings and electric servo controller.  

The quick build kit is mostly assembled leaving only the elevator hinge and trim left to the customer to install

ACCESSORIES

What you WILL need to complete your Kit

Landing Gear

All landing gear options are available for the customer to choose tail wheel or nose gear and are pre-configured to accept floats and skis.

Panel

Glasair has preferred IFR and VFR panel options to choose from or you can work with your own local avionics installer to configure to your needs.

Powerplant

While any engine can feasibly be installed, the maximum performance is achieved with 180hp to 210hp IO-360 and IO 390 or CD 155 Continental Turbo Diesel.

FLOATS

NOSE-WHEEL

TAILWHEEL

ThThe Sportsman comes standard with the each configuration build into the base airframe allowing it to be customized for your adventure with Nose-Wheel, Tail-Wheel, and both Straight or Amphibious Float Landing gear. Larger tires for unimproved runways, Extended Tail-Wheel gear with Tundra tires for rocky river bars. Unique to the Sportsman, owners can switch from one landing gear configuration to another in an afternoon at will!

 

THE OPTIONS KITS

LANDING GEAR KIT OPTIONS

 

• Aircraft Certified Aluminum Spring Gear by Langair
• Grove 600-6 Wheel & Brake System with 1 1/4“ Axle
Nose Gear Strut – Optional
• Hydraulic Brake System with remote reservoir
• Standard 600-6 Aircraft Tires
• Tail Wheel Configuration – Steerable Tail Wheel
• Nose Wheel Configuration – 90-degree full castoring

FIREWALL FORWARD OPTIONS

 

• Aircraft Certified Aluminum Spring Gear by Langair
• Grove 600-6 Wheel & Brake System with 1 1/4“ Axle
Nose Gear Strut – Optional
• Hydraulic Brake System with remote reservoir
• Standard 600-6 Aircraft Tires
• Tail Wheel Configuration – Steerable Tail Wheel
• Nose Wheel Configuration – 90-degree full castoring

AFT SEAT OPTION

 

• Aircraft Certified Aluminum Spring Gear by Langair
• Grove 600-6 Wheel & Brake System with 1 1/4“ Axle
Nose Gear Strut – Optional
• Hydraulic Brake System with remote reservoir
• Standard 600-6 Aircraft Tires
• Tail Wheel Configuration – Steerable Tail Wheel
• Nose Wheel Configuration – 90-degree full castoring

Order your kit today

To order your kit, a deposit of 30% about $30,000, and final payment when your kit is ready for delivery. Kits can be purchased and manufactured in sections to support your schedule. 

We are accepting limited kit slots for 2022 as we re-ramp production with our TWTT program on hold through 2023. We have worked to develop regional builder assist programs to aid you in your build process. Contact us to learn more and find your area.

2022-23 PRODUCTION SCHEDULE

KIT # 7499 - MAPLETON, UTAH
Standard Kit 100%
KIT # 7500 - PORT ORANGE, FLORIDA 
Quick Build Kit 100%
KIT # 7501 - BANGKOK, THAILAND
Quick Build Kit 100%
KIT # 7502 - COLUMBIA, MONTANA
Quick Build Kit 100%
KIT # 7503 - LAKE HAVASU CITY, ARIZONA
Quick Build Kit 100%
KIT # 7504 - LAKE STEVENS, WASHINGTON
Quick Build Kit 100%
KIT # 7505 - CHICAGO, IL
Quick Build Assist 100%
KIT # 7506 - TWIN MOUNTAIN, NH
Quick Build Assist 100%
KIT # 7507 - ARGENTINA
Quick Build Assist 100%
KIT # 7508 - TENANTS HARBOR, ME
Quick Build Assist 95%
KIT # 7509 - MONTGOMERY, TX
Quick Build Assist 85%
KIT # 7510- HALF MOON BAY, CA
Quick Build Assist 75%
KIT # 7511- SPARTANBURG, SC
Quick Build Assist 75%
KIT # 7512 - REYKJAVÍK,
Quick Build Assist 50%

Contact sales

360.435.8533

Mon-Fri 8:00 am – 5:00 pm 

18530 59TH Drive NE 
Arlington, WA 98223

SEND US A MESSAGE and get started today