SPORTSMAN

SUPPORT

Sportsman & GlaStar Advisories & Bulletins

(Glasair Below) 

 

Index of GlaStar Advisory Publications, Rev. AP
Last Updated 10/31/16
Index of Sportsman Advisory Publications Rev R
Last Updated 4/19/18
Builder Memo Please Read 5/7/07
GlaStar Service Bulletin 1
SUBJECT: Trim Tab Hinge
GlaStar Service Bulletin 2
SUBJECT: Rudder Assembly
GlaStar Service Bulletin 3
SUBJECT: Wing Attach Hole in Aft Spars
GlaStar Service Bulletin 4
SUBJECT: Flap-Track Reinforcement
GlaStar Service Bulletin 5
SUBJECT: AN470A4-7 Soft Rivets
GlaStar Service Bulletin 6
SUBJECT: Main Fuel Tanks
GlaStar Service Bulletin 7
SUBJECT: Elevator/Aileron Control Yoke and Control Stick Pivot Brackets
GlaStar Service Bulletin 8
SUBJECT: Wing Main Root Ribs (P/N 201-00001-01)
GlaStar Service Bulletin 9
SUBJECT: Rod-End Bearings (P/N 170-0110-003)
GlaStar Service Bulletin 10
SUBJECT: Elevator Hinges
GlaStar Service Bulletin 11
SUBJECT: Tubing Flaring Tool (P/N 810-0190-001)
GlaStar Service Bulletin 12
SUBJECT: Brake Master Cylinder Clevises (P/N 090-00001-01)
GlaStar Service Bulletin 13
SUBJECT: Nose Gear Fork Weldment (P/N 401-07100-01)
GlaStar Service Bulletin 14, Rev. B
SUBJECT: Aft Fuselage Reinforcement and Horizontal Stabilizer Angle of Incidence
GlaStar Service Bulletin 15
SUBJECT: Rudder Trailing Edge
GlaStar Service Bulletin 16
SUBJECT: Trim Tab Counterweight Arm
GlaStar Service Bulletin 17
SUBJECT: Mislabeled cobalt napthenate promoter and DMA accelerator
GlaStar Service Bulletin 18
SUBJECT: 6.00/8.00 X 6 Brake Mounting Flange Assembly (P/N 401-01550-01)
GlaStar Service Bulletin 19
SUBJECT: Elevator and Trim Tab Hinge Edge Margin
GlaStar Service Bulletin 20, Rev. A
SUBJECT: Flap Handle Weldment (P/N 601-02010-01 (bare) or 601-02010P01 (powder-coated))
GlaStar Service Bulletin 21
SUBJECT: Lycoming Cowling Cooling Inlets
GlaStar Service Bulletin 22
SUBJECT: AN470A3-4.5 Soft Rivets
GlaStar Service Bulletin 23
SUBJECT: Door Latch Modification
GlaStar Service Bulletin 24
SUBJECT: Engine Mount Spacers (P/N 552-01001-01)
GlaStar Service Bulletin 25
SUBJECT: Variations in Wing Angle of Incidence
GlaStar Service Bulletin 26
SUBJECT: Upper Tailwheel Spring (P/N 401-09001-11)
GlaStar Service Bulletin 27
SUBJECT: Tailwheel Steering Springs (P/N 091–01500-01)
GlaStar Service Bulletin 28
SUBJECT: Lycoming O-320 Carburetor Inlet Gasket
GlaStar Service Bulletin 29, Rev. A
SUBJECT: AN509-10R10 Flush-Head Machine Screws
GlaStar Service Bulletin 30
SUBJECT: Right Horizontal Stabilizer Skin (P/N 302-00002-01)
GlaStar Service Bulletin 31
SUBJECT: Flap Handle Ratchet Plate (P/N 602-02001-01 (bare) or 602-02001P01 (plated))
GlaStar Service Buleltin 32
SUBJECT: O-320 and O-360 Exhaust System (P/N 925-02000-01 and 925-03000-01, respectively) Cracking
GlaStar Service Bulletin 32, Supplement A
SUBJECT: O-320 and O-360 Exhaust System (P/N 925-02000-01 and 925-03000-01, respectively) Cracking
GlaStar Service Bulletin 33
SUBJECT: O-320 and O-360 Exhaust System (P/N 925-02000-01 and 925-03000-01, respectively) Inspection Requirements
GlaStar Service Bulletin 34
SUBJECT: Upper Right El evator Skin (P/N 303-00002-03)
GlaStar Service Bulletin 35
SUBJECT: Left and Right Upper Inboard Wing Skins (P/N 201-00014-01 and -02)
GlaStar Service Bulletin 36
SUBJECT: Auxiliary Fuel Tank Sump Drains
GlaStar Service Bulletin 36, Supplement A
SUBJECT: Auxiliary Fuel Tank Sump Drains
GlaStar Service Bulletin 37
SUBJECT: Aileron Cable Interference
Service Bulletin 38
SUBJECT: AN470A4-9 Soft Rivets
GlaStar Service Bulletin 39
SUBJECT: Counterweight Attachment to Elevator Counterweight Ribs
GlaStar Service Bulletin 40
SUBJECT: Elimination of Trim Tab Counterweight with Electric Trim System
GlaStar Service Bulletin 41
SUBJECT: NicoPress Sleeves (P/N 450-0002-003)
GlaStar Service Bulletin 42
SUBJECT: Airborne 211CC, 212CW and 215CC Vacuum Pumps (P/Ns 120-0211-001 & -002)
GlaStar Service Bulletin 43, Rev. B
SUBJECT: Usable Fuel
GlaStar Service Bulletin 44
SUBJECT: Aileron Counterweight Assemblies
GlaStar Service Bulletin 45
SUBJECT: Rotationally Molded Plastic Auxiliary Tanks
GlaStar Service Bulletin 46
SUBJECT: Electric Elevator Trim System
GlaStar Service Bulletin 47
SUBJECT: Control Cable Safety Guides
GlaStar Service Bulletin 48
SUBJECT: Elevator Bellcrank Clearance Inspection and Aileron Inspection Provisions
GlaStar Service Bulletin 49
SUBJECT: Inspection of welded cage and seat assemblies for cracking.
GlaStar Service Bulletin 50
SUBJECT: Inspection of main landing gear for proper heat treatment.
GlaStar/Sportsman Service Bulletin 51
SUBJECT: Inspection of the 100-0640-009 angle stock supplied in GlaStar and Sportsman Kits.
Sportsman Service Bulletin 52
SUBJECT: Sportsman stabilizer pin engagement
GlaStar/Sportsman Service Bulletin 53
SUBJECT: Welded Aluminum Fuel Tank Inspection for Pinhole Leaks
Sportsman Service Bulletin 54, Rev A
SUBJECT: Sportsman Wing Strut Trim Limits
Sportsman Service Bulletin 54, Rev A
Repair Kit Instructions
Sportsman Service Bulletin 55
SUBJECT: Wing Fold Mechanism
Sportsman Service Bulletin 56, Rev A
SUBJECT: Sportsman Wing Strut Drilling Tolerances
Sportsman Service Bulletin 57, Rev A
SUBJECT: Aileron Crossover Cable Lengths
GlaStar/Sportsman Service Bulletin 58
SUBJECT: Prop Governor Gasket
GlaStar/Sportsman Service Bulletin 59
SUBJECT: Spinner Backplate fatigue cracking
Sportsman Service Bulletin 60
SUBJECT:Stewart Warner Electric Sending Units
Sportsman Service Bulletin 61
SUBJECT:Nose Gear axle nut
GlaStar/Sportsman Service Bulletin 62
SUBJECT:Aileron Counterweight Assemblies
GlaStar/Sportsman Service Bulletin 63
SUBJECT:Control Safety Cable Guides
GlaStar/Sportsman Service Bulletin 64
SUBJECT:Inspection of welded cage and seat assemblies for cracking
Sportsman Service Bulletin 65
SUBJECT:Engine baffle cracks
Sportsman Service Bulletin 66
SUBJECT:VHF COM Interference Check with Garmin 430W / 530W series GPS/COM units.
Sportsman Service Bulletin 66-corrective action
SUBJECT:VHF COM Interference Check with Garmin 430W / 530W series GPS/COM units.
Sportsman Service Bulletin 67
SUBJECT:Elevator Counterweights
GlaStar/Sportsman Service Bulletin 68
SUBJECT:Fuel Tank Vents and Icing
GlaStar/Sportsman Service Bulletin 69, Rev A.
SUBJECT:Seat Belt Anchor Points
GlaStar/Sportsman Service Bulletin 69
Seat Belt Anchor Point Cage Modification Instructions – Welded Option
GlaStar/Sportsman Service Bulletin 69
Seat Belt Anchor Point Cage Modification Instructions – Clamp-up Option
GlaStar/Sportsman Service Bulletin 69
REFERENCE: Inertia Reel Installation Instructions.
GlaStar/Sportsman Service Bulletin 69
REFERENCE: Shoulder Harness Crossbar Retrofit Kit Instructions
GlaStar/Sportsman Service Bulletin 70
REFERENCE: Vertical fin cracks
GlaStar/Sportsman Service Bulletin 71
REFERENCE: Horizontal Alignment Pin Nut
GlaStar/Sportsman Service Bulletin 72
REFERENCE: Autopilots Cable Clamps
 GlaStar/Sportsman Service Bulletin 73
REFERENCE: Garmin Autopilot cable ball position and cable routing.
GlaStar/Sportsman Service Bulletin 74-Rev A
REFERENCE: Fuselage Tail Cone Damage.
  
 GlaStar Service Letters 
GlaStar Service Letter 1
SUBJECT: Options Development
GlaStar Service Letter 2
SUBJECT: Operating Limitations
GlaStar Service Letter 3
SUBJECT: Trim Cable Bracket Angle (P/N 303-00020-01) and Sheet (P/N 303-00021-01)
GlaStar Service Letter 4
SUBJECT: Operating Limitations on Floats
GlaStar Service Letter 5
SUBJECT: After Market or self-developed electric flap installations
GlaStar Service Letter 6
SUBJECT: Weight Conscious GlaStar Assembly
Sportsman Service Letter 7
SUBJECT: Revision to Sportsman Tricycle Gear Owner’s Manual
GlaStar/Sportsman Service Letter 8
SUBJECT: Main Landing Gear Retaining Bolts
 
 GlaStar/Sportsman Advance Notices of Revision (ANORs) 
GlaStar ANOR of 8/25/97
GlaStar ANOR of 2/18/98
GlaStar ANOR of 03/13/03
Sportsman ANOR of 09/21/05
Sportsman ANOR of 11/17/06
 

 

Glasair ADVISORIES & BULLETINS

Glasair Service Bulletin 1 SUBJECT: Nose Gear Scissors Glasair Service Bulletin 2 SUBJECT: Retractable Landing Gear Glasair Service Bulletin 3 SUBJECT: Emergency Gear Extension Spring Tabs
Glasair Service Bulletin 4 SUBJECT: Leaking Oleo Struts Glasair Service Bulletin 5 SUBJECT: Control Stick Sleeve/Elevator Horn Glasair Service Bulletin 6 SUBJECT: RG Gear Strut Leaks
Glasair Service Bulletin 6 Rev A SUBJECT: RG Gear Strut Leaks Glasair Service Bulletin 7 SUBJECT: Welds Omitted On Glasair FT Inboard Rib Attach Bracket Glasair Service Bulletin 7 Rev A SUBJECT: Welds On Inboard Rib Attach Brackets Interfere With Washers
Glasair Service Bulletin 8 SUBJECT: Defective Fuel Fittings Glasair Service Bulletin 9 SUBJECT: Possible Nose Gear Shimmy Problems Glasair Service Bulletin 9 Rev A SUBJECT: Hydraulic Nose Gear Shimmy Damper
Glasair Service Bulletin 9 Rev B SUBJECT: Nose Gear Shimmy Glasair Service Bulletin 9 Rev C SUBJECT: Glasair I RG Shimmy Damper Modification Glasair Service Bulletin 10 SUBJECT: Battery/Alternator Master Switch
Glasair Service Bulletin 11 SUBJECT: S-Tec Autopilot Aileron Actuating Push Rod Glasair Service Bulletin 12 SUBJECT: F3416M Rod End Bearings Glasair Service Bulletin 13 SUBJECT: RG Printed Circuit Boards
Glasair Service Bulletin 14 SUBJECT: Fixed Pitch Spinner Backplates Glasair Service Bulletin 15 SUBJECT: Oildyne Hydraulic Pump Fittings Glasair Service Bulletin 16 SUBJECT: New Style Gas Cap Seal
Glasair Service Bulletin 17 SUBJECT: Derakane Vinyl Ester Resin Glasair Service Bulletin 18 Rev A SUBJECT: Fuel Contamination Glasair Service Bulletin 19 SUBJECT: Engines, Propellers, and Propeller Governors, Glasair III
Glasair Service Bulletin 20 SUBJECT: Electrical System; 28V Option Glasair Service Bulletin 21 SUBJECT: Fuselage Panel Modifications Glasair Service Bulletin 22 SUBJECT: Fitting of the Engine Mount
Glasair Service Bulletin 23 SUBJECT: Gap Between Nose Wheelwell Box and Firewall Glasair Service Bulletin 24 SUBJECT: Glasair III Horizontal Stabilizer Stiffening Glasair Service Bulletin 25 SUBJECT: Contouring of Upper Surface Main Spar Cap
Glasair Service Bulletin 26 SUBJECT: Glasair RG Nose Gear Drag Brace Reinforcement Glasair Service Bulletin 27 SUBJECT: Instrument Panel Template 3G1501 Glasair Service Bulletin 28 SUBJECT: Fitting of Various Glasair I Parts to Glasair II Fuselage
Glasair Service Bulletin 29 SUBJECT: Fitting of Early Model Landing Gear Boxes Glasair Service Bulletin 30 SUBJECT: Landing Gear Box FWD Partial Spar Support Fabrication Glasair Service Bulletin 31 SUBJECT: Erroneous Firewall Rib Location
Glasair Service Bulletin 32 SUBJECT: Glasair III Engine Mount and Firewall Template, kits 3001-3009, 3011-3014 Glasair Service Bulletin 33 SUBJECT: Glasair III Engine Mount and Firewall Template, kits 3015-3026 Glasair Service Bulletin 34 SUBJECT: Hole Size in First Production Run Flap Ratchet Plates
Glasair Service Bulletin 35 SUBJECT: Correct Control Stick Sleeve for the Glasair II Glasair Service Bulletin 36 SUBJECT: Inspection for Fuel Leakage Around Main Spar Attach Fitting Bolts Glasair Service Bulletin 37 SUBJECT: Glasair II Lower Wing Panel With Glasair III Wheelwell Scribe Lines
Glasair Service Bulletin 38 SUBJECT: Location Of Flap Control Assembly Glasair Service Bulletin 39 SUBJECT: Glasair Taildragger Main Landing Gear Upper Attach Bolts Glasair Service Bulletin 40 SUBJECT: Relocation of Hydraulic Pressure Gauge Sensing Point
Glasair Service Bulletin 41 SUBJECT: Oildyne Hydraulic Pump Pressure Increase Glasair Service Bulletin 42 SUBJECT: Inadequate FT Nose Wheel Pivot Range Glasair Service Bulletin 43 SUBJECT: Possible Incorrect Cable Thimble Installation
Glasair Service Bulletin 44 Rev A SUBJECT: Glasair FT Nose Landing Gear Modification Glasair Service Bulletin 45 SUBJECT: Possible Incorrect Rudder Pedal Center Support Bracket Glasair Service Bulletin 46 SUBJECT: Mislocation of Nose Wheel Axel Roll Pin Holes
Glasair Service Bulletin 47 Rev A SUBJECT: Hydraulic Actuator Piston Retaining Nut Glasair Service Bulletin 48 SUBJECT: Canopy Frame Modification Glasair Service Bulletin 49 SUBJECT: Erroneous Dimensions on the Firewall Flange Template, PN 400-0016-03
Glasair Service Bulletin 50 SUBJECT: Erroneous Trim Lines on Left Canopy Frames Glasair Service Bulletin 51 SUBJECT: Possible Nose Gear Drag Brace Binding Glasair Service Bulletin 52 SUBJECT: Main Gear Hydraulic Actuator Rod retrofit
Glasair Service Bulletin 53 SUBJECT: Possible Interference Between Elevator Actuator Arm and Rudder Actuator Linkage Glasair Service Bulletin 54 SUBJECT: Elevator Counterweight Arm Modification Glasair Service Bulletin 55 SUBJECT: Possible Play Between Prop Extension and Lug Bushings for Fixed Pitch Props
Glasair Service Bulletin 56 SUBJECT: Nose Gear Down Lock Spring Installation Glasair Service Bulletin 57 SUBJECT: Side Brace bellcrank and Side Brace Upper End Bushing Replacement Glasair Service Bulletin 58 SUBJECT: Rudder Pedal Assembly Interference With Nose Gear Support Ribs
Glasair Service Bulletin 59 Rev A SUBJECT: Trim Control Wheel Shaft Modifications Glasair Service Bulletin 60 SUBJECT: Defective Hydraulic System Tubing Glasair Service Bulletin 61 Rev A SUBJECT: Fuel Leaks Through Spar Caps
Glasair Service Bulletin 62 SUBJECT: Possible Wing Leading Edge Interference With Nose gear Box and Fuselage Reinforcement Rib Glasair Service Bulletin 63 SUBJECT: Mislabeled terminals on Gear retract Printed Circuit Board Glasair Service Bulletin 64 SUBJECT: Mounting Hole Locations in Main landing gear Forward Side brace Brackets
Glasair Service Bulletin 65 SUBJECT: Facet Electric Fuel Boost Pump Alert Glasair Service Bulletin 66 SUBJECT: Lord Engine Suspension Assemblies Glasair Service Bulletin 67 SUBJECT: Trim System Interference between Cable Drum and trim Control Box Housing
Glasair Service Bulletin 68 SUBJECT: Cabin Heat Box Gasket Glasair Service Bulletin 69 SUBJECT: Elevator Counterweight Reinforcement Glasair Service Bulletin 70 SUBJECT: Induction System Improvements
Glasair Service Bulletin 71 Rev A SUBJECT: Inspection requirements for Glasair III Engine Mounts Glasair Service Bulletin 71 Rev C SUBJECT: Reinforcement Procedures for Glasair III Engine Mounts Glasair Service Bulletin 72 SUBJECT: Glasair III Hydraulic Snubber
Glasair Service Bulletin 73 SUBJECT: Possible Incorrect Engine Mount Nuts Glasair Service Bulletin 74 SUBJECT: Clearance Between Exhaust System and Oil Cooler Glasair Service Bulletin 75 Rev A SUBJECT: Replacing the RG Nose Gear Fork Attach Bolts
Glasair Service Bulletin 76 SUBJECT: Landing Gear Toe-in Alignment Procedure Glasair Service Bulletin 77 SUBJECT: Main Gear Hydraulic Actuator Rod-end Reinforcement Glasair Service Bulletin 77 Rev A SUBJECT: Main and Nose gear hydraulic Actuator Rod-end Reinforcement
Glasair Service Bulletin 78 SUBJECT: Various Nose Gear Installation Problems Glasair Service Bulletin 79 SUBJECT: Nose Gear Emergency Extension Gas Spring Glasair Service Bulletin 80 SUBJECT: Nose Gear Shimmy Damper Compression Spacer removal
Glasair Service Bulletin 81 SUBJECT: Possible Cracks in Spinner Backplates for Fixed Pitch Wooden Props Glasair Service Bulletin 82 UBJECT: Possible Cracks in Glasair III 90 deg Induction Elbows and Support Arms Glasair Service Bulletin 82 Rev A SUBJECT: Reworking the Glasair III 90 deg Induction Elbow
Glasair Service Bulletin 83 SUBJECT: Cosmetic Paint Cracks at Base of Windshield Glasair Service Bulletin 84 SUBJECT: Main Tank Fuel Gauge Components for Glasair II-S Glasair Service Bulletin 85 SUBJECT: Nose Gear Wheelwell Firebarrier Installation
Glasair Service Bulletin 86 SUBJECT: Lycoming Airworthiness Directive Concerning Prop Governor External Oil Line Glasair Service Bulletin 87 Rev A SUBJECT: Seat Belt Attach Angle Fabrication Glasair Service Bulletin 88 SUBJECT: Incorrectly Labeled Main Gear Side Brace Assemblies
Glasair Service Bulletin 89 SUBJECT: FT Nose Gear Strut Reinforcement Glasair Service Bulletin 90 SUBJECT: Rudder Actuator Linkage Incorrect Length Glasair Service Bulletin 91 SUBJECT: Failure of the Alternate Air Door Spring
Glasair Service Bulletin 92 SUBJECT: RG Nose gear Emergency Extension Gas Spring Glasair Service Bulletin 93 SUBJECT: Revised Gross Weight and Main Landing Gear Strut Replacement Glasair Service Bulletin 94 Rev A SUBJECT: Elevator Hinge Brackets – PN 552-4423-001
Glasair Service Bulletin 95 SUBJECT: Glasair III Landing Gear Oleo Strut Welded Joints Glasair Service Bulletin 95 Rev A SUBJECT: Glasair III Landing Gear Oleo Strut Welded Joints Glasair Service Bulletin 96 SUBJECT: Elevator Trim Box Main Gear Assembly
Glasair Service Bulletin 97 SUBJECT: Incorrect Placement of Pedals on New Style Rudder Pedal Weldments Glasair Service Bulletin 98 SUBJECT: Slotted Flap Hinge Point Corrections Glasair Service Bulletin 99 SUBJECT: Landing Gear Electrical System Wiring Change
Glasair Service Bulletin 100 SUBJECT: Nose Gear Drag Brace Possible Failure to Lock Over-center Glasair Service Bulletin 101 SUBJECT: Fuel Filter Assembly Inspection and Modification Glasair Service Bulletin 102 SUBJECT: Forward Fuselage Belly Section Foam Core Placement
Glasair Service Bulletin 103 SUBJECT: Nose gear Over-center Springs Glasair Service Bulletin 104 SUBJECT: 3/16″ Aluminum Tubing for Brake Lines Glasair Service Bulletin 105 rev A SUBJECT: Retractable Landing Gear Oleo Strut Weld Inspection and Repair
Glasair Service Bulletin 106 SUBJECT: Bolts Securing the Elevator Hinge Brackets to the Stabilizer Shearweb Glasair Service Bulletin 107 SUBJECT: Barry Controls Standard Engine Vibration Isolators for the Glasair III Glasair Service Bulletin 108 SUBJECT: Glasair III Cowl Flap Rod End Bearings
Glasair Service Bulletin 109 SUBJECT:Glasair III Nose Gear Hydraulic Actuator Rod Glasair Service Bulletin 110 SUBJECT: II-S Outboard Main Gear Strut Attach Bracket Installation Glasair Service Bulletin 111 SUBJECT: Flap Plunger Bolt Possible Failure
Glasair Service Bulletin 112 SUBJECT: Center of Gravity Location and Longitudinal Stability and Control for Glasair II-S FT Glasair Service Bulletin 112A SUBJECT: Center of Gravity Location and Longitudinal Stability and Control for Glasair II-S FT Glasair Service Bulletin 113
Glasair Service Bulletin 113A Glasair Service Bulletin 114 SUBJECT: Glasair II-S RG Center of Gravity Location and Longitudinal Stability and Control Glasair Service Bulletin 114A SUBJECT: Glasair II-S RG Center of Gravity Location and Longitudinal Stability and Control
Glasair Service Bulletin 115, Rev. A SUBJECT: Inadvertent Shut-Off of Fuel Selector Valve Glasair Service Bulletin 116 SUBJECT: Glasair I Large Rudder Requirement with Wing Tip Extensions Glasair Service Bulletin 117 SUBJECT: Fatigue Separation of Alternate Air Door
Glasair Service Bulletin 118, Rev. A SUBJECT: Glasair Super II TD Main Landing Gear Position Glasair Service Bulletin 119 SUBJECT: Glasair III Back-Up Drag Brace Microswitch Installation Glasair Service Bulletin 120 SUBJECT: Shoulder Harness Attachment
Glasair Service Bulletin 121 SUBJECT: Glasair I RG Early Black Intermittent-Duty Solenoids Glasair Service Bulletin 122 SUBJECT: Navigation Antenna Length Glasair Service Bulletin 123 SUBJECT: Glasair FT Outboard Rib Landing Gear Attach Brackets
Glasair Service Bulletin 124 SUBJECT: Glasair III Main Gear Side Brace Bellcrank Bracket Bushings Glasair Service Bulletin 125 SUBJECT: Glasair I RG Cast Landing Gear Scissors Glasair Service Bulletin 126 SUBJECT: Glasair III Landing Gear Strength Upgrade
Glasair Service Bulletin 127 SUBJECT: Glasair RG Hydraulic System Filters Glasair Service Bulletin 128 SUBJECT: Hydraulic Pump Upgrade Offer Glasair Service Bulletin 129 SUBJECT: Glasair III Drag Brace Weld Clearance Inspection
Glasair Service Bulletin 130 SUBJECT: Fuel Filter Bowl Securing Bolt Glasair Service Bulletin 131 SUBJECT: Fuel Venting Overboard Glasair Service Bulletin 132 SUBJECT: Glasair Super II Rudder Pedal Control Weldments
Glasair Service Bulletin 133 SUBJECT: Glasair I TD Revised Gross Weight and Main Landing Gear Strut Replacement Glasair Service Bulletin 134 SUBJECT: Directional Control on Takeoff Glasair Service Bulletin 135 SUBJECT: Glasair FT Outboard Rib Attach Landing Brackets
Glasair Service Bulletin 136 SUBJECT: Hydraulic Actuator Seal Damage Glasair Service Bulletin 137, Rev. A SUBJECT: Glasair III Main Landing Gear Side Brace Stud Replacement Glasair Service Bulletin 138 SUBJECT: Electric Trim Turnbuckle Replacement
Glasair Service Bulletin 139 SUBJECT: Glasair I & II RG PC Boards with “Option 1” Diodes in Place Glasair Service Bulletin 140 SUBJECT: Glasair II, II-S, Super II and III Elevator Torque Tube Assembly Welds Glasair Service Bulletin 141 SUBJECT: Glasair RG Landing Gear Scissor Bolt Bushing Installation
Glasair Service Bulletin 142 SUBJECT: AN470A4-7 Soft Rivets Glasair Service Bulletin 143 SUBJECT: Glasair III Nose Gear Drag Link Studs Glasair Service Bulletin 144 SUBJECT: Tubing Flaring Tool (P/N 810-0190-001)
Glasair Service Bulletin 145 SUBJECT: Glasair III Rod-End Bearings (P/N 170-0110-003) Glasair Service Bulletin 146 SUBJECT: Glasair II-S and Super II FT Nose Gear Trunnion Attach Plate Fasteners Glasair Service Bulletin 147, Rev. A SUBJECT: Glasair II, II-S and Super II RG Main Gear Half Fork Attach Bolts
Glasair Service Bulletin 148 SUBJECT: Mislabeled CoNap and DMA Promoter Glasair Service Bulletin 149 SUBJECT: Glasair III Main Landing Gear Trunnion Tubes Glasair Service Bulletin 150 SUBJECT: Fram Fuel Filter Assembly (P/N 332-0341-101)
Glasair Service Bulletin 151 SUBJECT: AN470A4-9 Soft Rivets Glasair Service Bulletin 152 SUBJECT: NicoPress Sleeves (P/Ns 450-0002-003, -004 & -015) Glasair Service Bulletin 153 SUBJECT: Aileron Counterweight Assemblies
Glasair Service Bulletin 154 SUBJECT: Gear Warning Buzzer (P/N 210-0677-001) Glasair Service Bulletin 155 SUBJECT: Airborne 211CC and 215CC Vacuum Pumps (P/N 120-0211-001) Glasair Service Bulletin 156 SUBJECT: Resin Coating of Glasair III Wing Fuel Bays
Glasair Service Bulletin 157 SUBJECT: Glasair IIS 200hp RG engine mounts (P/N 222-0269-103) Glasair Service Bulletin 158 SUBJECT: Glasair III engine mount (P/N 223-1420-101) Glasair Service Bulletin 159 SUBJECT: Prop Governor Gasket
Glasair Service Bulletin 160 SUBJECT:Nose Gear axle nut Glasair Service Bulletin 161 SUBJECT:Inspection of RG Gear Oleos for Corrosion
Glasair Service Letters
Glasair Service Letter 1 SUBJECT: Vinyl Ester Resin Change Glasair Service Letter 2 SUBJECT: Fuel Pressure Fluctuations in Glasairs Glasair Service Letter 3 SUBJECT: Landing Gear Scissors with Pressed-In Bushings
Glasair Service Letter 4 SUBJECT: Exhaust System Cracking Glasair Service Letter 5 SUBJECT: Glasair Gross Weight Glasair Service Letter 6 SUBJECT: Cabin Fresh Air Vent Installation
Glasair Service Letter 7 SUBJECT: Factory Molded Landing Gear Boxes Glasair Service Letter 8 SUBJECT: Reminder To Comply With Glasair III SB 95
Glasair Advance Notices of Revision (ANORs)
Glasair II TD ANOR of 7/1/92 Glasair II TD ANOR of 10/1/92 Glasair II FT ANOR of 4/1/92
Glasair II FT ANOR of 7/1/92 Glasair II FT ANOR of 10/1/92 Glasair II RG ANOR of 4/1/92
Glasair II RG ANOR of 7/1/92 Glasair II-S TD ANOR of 7/1/92 Glasair II-S TD ANOR of 10/1/92
Glasair II-S TD ANOR of 1/1/93 Glasair II-S TD ANOR of 7/1/93 Glasair II-S TD ANOR of 10/13/93
Glasair II-S TD ANOR of 1/19/94 Glasair II-S FT ANOR of 4/1/92 Glasair II-S FT ANOR of 7/1/92
Glasair II-S FT ANOR of 10/1/92 Glasair II-S FT ANOR of 7/1/93 Glasair II-S FT ANOR of 10/13/93
Glasair II-S FT ANOR of 1/19/94 Glasair II-S RG ANOR of 4/1/92 Glasair II-S RG ANOR of 7/1/92
Glasair II-S RG ANOR of 10/1/92 Glasair II-S RG ANOR of 1/1/93 Glasair II-S RG ANOR of 7/1/93
Glasair II-S RG ANOR of 10/13/93 Glasair II-S RG ANOR of 1/19/94 Glasair Super-II TD ANOR of 1/1/93
Glasair Super-II TD ANOR of 7/1/93
Glasair NEWSLETTER

STAY IN
THE LOOP

Be among the first to hear about new products, company news, and developments. Sign up for our newsletter.